title

info





RESTAURANT

Designer: Ramon Nizamuddin
Location: (Unknown)
Course: Commercial Detailing
Software: Freehand Sketch (not a software)
Description: During fourth semester, I drew a simple cube shaped building as our freehand design project. The building that I chose to draw was a two storey restaurant with a ramp near the entrance of the building. I used freehand techniques to draw the building, as well as the ramp as shown below.



arrow


2099 GRAND RAVINE DR.

Designer: Ramon Nizamuddin, David Jackman
Location: 2099 Grand Ravine Drive
Course: Building Renovation
Software: AutoCAD, Google Sketchup
Description: In the second half of semester five, me and my partner worked with a client and provided our client unique renovation drawings. The purpose of this project is to meet the client's needs and their requirements. We did many measurements of the house and provided many types of drawings such as existing and proposed drawings of the house as shown below.




arrow


EDEN BUILDING

Designer: Ramon Nizamuddin, Karl Hughes, Rafeel Nasir
Location: Square One Drive & Hammerson Drive
Course: Architectural Studio 5
Software: AutoCAD, 3D AutoCAD
Description:
The Eden Building is a mixed use dwelling unit building drawn in the downtown area. This project was completed in groups of three during semester five. We used many types of drawings such as working drawing, 3D modeling and rendering. This building follows the Ontario Building Code and LEED sustainable requirements.Most of our drawings are shown below.



arrow


HOUSE IN MOSTEIRO

Designer: Ramon Nizamuddin
Location:Santa Maria da Feira, Portugal
Course: Architectural Computer Visualization
Software: 3DS Max Design
Description: During semester five, I started to use a software called 3DS Max Design to model and render a building in a 3D view. We model it in both exterior and interior view as shown below.



arrow


TURNER RESIDENCE

Designer: Ramon Nizamuddin
Location: Brampton, Ontario
Course: Building Information Modeling
Software: Revit
Description: During our sixth and final semester, I started to learn and use a software that does both 2D drafting and 3D modeling of a building, and that software is called Revit. By using that software, I made 2D drawings of a house such as plans, elevations and section. I also made a 3D drawing such as an exterior and interiore render of the house as shown below.



arrow